With our HeadRush product, the midi function of the unit will send out only Program Change when is connected via USB cable or midi ports of the unit. The following midi function is available to the device:
MIDI Thru: Tap On to use the MIDI output as a MIDI throughput; any MIDI information sent to the HeadRush Gigboard’s MIDI input will be sent directly to the MIDI output. Tap Off to use the HeadRush Gigboard’s MIDI output normally; the HeadRush Gigboard will be able to send its own MIDI information out of the MIDI output.
Recv MIDI Clock: Tap On to enable the HeadRush Gigboard to receive MIDI clock information. Tap Off to use the HeadRush Gigboard’s own internal MIDI clock (which will not be sent out).
Prog Change: Tap Send to enable or disable the HeadRush Gigboard’s transmission of MIDI program change messages when you load a rig. Tap Recv to enable or disable the HeadRush Gigboard’s reception of MIDI program change messages from an external MIDI device.
Note: The same goes for the Pedalboard and MX5.